COVID Film: Crying Baby Fire Animation

Posted on by Thor

Today is my day off, so I am committing to animating the flaming baby close up scene. I tried animating ti with a rising bubble technique, but wasn’t satisfied. Instead I referenced a burning curtain. Animating fire involves absolute chaos with principles of waving motion and rising currents.

I started by animating the chaos on twos. With that pass finished, I returned to add inbetweens to put the scene on ones. These inbetweens should smooth out some of the motion and make it more fluid. I also change the animation to try and get the rising motion to work better.

Will all this work? I honestly have no idea. I am proceeding as if it will all fall in place but ti could very well fall apart since I am not a seasoned effects animation. I should be able to wrestle any scene into submission if I simply keep correcting things that feel wrong.

I now have a work flow that can paint the flames pretty convincingly, but it is the motion that will really sell the shot.

COVID Film: Flaming baby

Posted on by Thor

This morning I forgot to do a write up since I wanted to get right into animation on COVID Dystopia. I am slowly learning the intricacies of animating fire. I am probably making some mistakes but the animation flows so fast that I am hoping no one notices.

I based this animation of the flaming baby on a scene of a curtain burning in a living room. I have been using various methods to plan the animations and this is the first time I just worked straight ahead. In general the flickering action moves upwards but I think I can do better.

The next scene is a close up on the babies face. Hopefully I can get the flames to rise upwards as if in a forest fire. I am also trying to get the flames to appear as I painted then in the illustrations. That means adding lots of extra textural strokes. I am importing each frame into procreate to continue the painting process. I love the brushes in that program so it is worth the extra effort.

I am finding that deep blue screens are best for transferring the flame animations. I might actually go back to the first flame animation I did since it got greyed out and washed out with a green screen. Trail and error is the best way I have to figure out what works when animating flames. I have many more flame animation scenes to continue the experiments.

I am teaching eight hours of virtual classes tomorrow so I might not get a scene done tomorrow. Maybe I can update the first fire animation scene before classes start. If I had an animation student tomorrow they would be learning how to animate fire since that is the ongoing creative challenge I am facing.

COVID Film: Asteroid Fire Trail

Posted on by Thor

In this shot an asteroid enters the Earth’s atmosphere. I animated the fire trail in Callipeg and then exported each of the frames into Procreate where I continued to paint them. This is a time consuming process that involves making copies of every asteroid and adding them to groups. I end up spending far too much time turning groups off an on.

The flaming hot front face of the asteroid was fun to do. I added a clipping mask over the asteroid and then gave that layer a subtract mode setting. I used the flame brush in Procreate to get the more textured strokes. All of the animation is fast and furious and over in less than a second.

In this animation I once again used a bubble technique to keep the energy flowing outward. I want to get to the point where I am working more straight ahead, allowing the shapes to change organically. I have so many fire scenes to animate that I am hoping I will loosen up even more and act with more instinct rather than control.

I still have to add this animation to the final composite. A glow will need to be added. Then I will be off an animating another fire. At some point I will find the perfect work flow.

COVID Film: First Fire

Posted on by Thor

Yesterday I animated fire for the first time. I like the motion but the timing might be a bit fast. Next time I might reduce the spacing a bit between drawings. I am not quite satisfied with the painting effect since it is rather flat. I might bring these drawings into Procreate and paint them again there. It might make sense to simply animate fire in Procreate as well.

This animation was done in Callipeg and the painting brush choices are limited. I painted it flat on two layers and used After Effects to add a glow effect. Today I plan to animate an asteroid trail which had much linger spikier tendrils. It is much more textured and will require greater care when painting each frame.

I have many fire scenes to animate and paint so the best workflow will evolve as I learn more. I can say that even if not fully satisfied with this first experiment, it certainly sparks extra life into this scene.

I am still unable to render the full film in Premiere Pro. Fifty one shots render incorrectly with large portions of each shot being cut off and thrust into darkness. Pam said she should be able to resolve the issue when she has time to look at it. I therefor will just keep animating and hope this can be solved.

COVID Film: The Blitz

Posted on by Thor

This scene was reworked to add some subtle animation to the couple leaning in to kiss. I had to separate the couple from the rest of the painting and then the pair were separated from each other. The animation simply involved adding a gap between the face mask canisters and then having then touch by the end of the scene. Since only the head and shoulders leaned back, I didn’t need to redraw the arms.

I tried rendering the whole movie yesterday to post the updates to FilmFreeway. However the editing program, Premeire Pro reported memory issues and a warning that I should proceed with caution. Forty seven of the shots in the film rendered incorrectly. Large black bands appeared and the scenes were cropped incorrectly.

Rather than proceed in a panic, I decided to put the movie aside and wait to see if Pam could come up with a solution when she got back home. The last time something like this happened Premiere Pro erased all past saved versions of the project. I had saved a version offline on OneDrive so I might only loose a few days work if everything blew up.

Pam saved the latest version to the One Drive and deleted the program memory cache. She managed to recover from most of the damage with just one scene needing to be re-uploaded. At the end of the night I tried to render the movie one more time but it failed, freezing about one third of the way into the render. The scene it froze at is a recent addition being the Maya sacrifice scene. However there is nothing about the scene that should cause the program to freeze.

I suspect these problems are being caused by an automatic update to the software. Anytime Adobe updates the program they seem to make it worse rather than better. I plan to attempt another render of the movie after writing this. If it once again fails, I will hope Pam can dig in and find a work around. Here is to hoping the software can do what it was designed to do.

COVID Film: Death of Democracy

Posted on by Thor

With the Death of Democracy scene I have isolated Jamie Raskin and a background protestor so far.Some subtle animation in the upper right hand corner of the scene should draw the audience eye so they are looking in the right spot of the next scene.

Jamie will arch his back ever so slightly to show pride and a protestor will raise a fist in defiance. Since the protestor is so small I will have to animate him at double the resolution. I will also scale him up making him easier to draw.

The main reason I need to rework the scene is because some of the heads of the representatives were warping due to the depth map I applied. I will isolate and eliminate that warping.

COVID Film: Maya Composite in Progress

Posted on by Thor

I finished the final composite of the Maya sacrifice scene this morning. This composite shown her isn’t quite finished yet. The high priest’s legs are on top of the victim’s arms. I animated those legs subtly but I ended up cropping the scene so close that the legs did not show. I usually tone down the camera moves used once animation is added to a scene. I don’t want a camera move to detract from the movement of the character.

I was pleased the dripping blood animation worked out so well. I at first considered a splash effect when the hand plunged into the chest but I cut that out after adding the dripping effect. Most of the animation from this point forward will e effects animation. Once I master animating fire I will have a bunch of shots that could use the effect. Getting the fire to blend with the paintings will be the main challenge once the animation starts to work.

COVID Film: Maya Clean up Animation

Posted on by Thor

this is the clean up pass of the Maya Sacrifice scene. The flaming baby scene precedes this and I decided to use the crying baby as the high priest in this scene. Chances are most people will not notice. My thought is that most world leaders are crying babies. The only thing I added was the eyes which first look at the victim’s chest and then at the virus after it is extracted.

I am close to finishing the scene but there are many more layers that need to be composited in After Effects. The hand is drawn so big because it is moving very fast causing a blur. I could finish the scene today but I am not sure if time will allow for that. I am getting a Novavax vaccine shot at 7PM tonight. I am timing this shot so it is two weeks out from the Chicago International REEL Shorts Film Festival. Buttons came in last night and they looked good. The post cards I printed look like crap but hopefully I can get a better printing run for the next festival.

COVID Film: Maya Animation Ruffs

Posted on by Thor

I was working with a virtual student trying to convince her that drawings can be rough and sloppy before being tied down. We did a series of gesture drawings which were timed at 5 minutes a piece. My goal was to get her to start drawing the motion rather than precious contour lines.

For the next hour I let her work on one of her character designs. She spent the time tracing lines she had already drawn. Her first drawing were apparently pixelated so I offered a lesson on resolution, which I learned quite a bit about in the last week with several of my films scenes being blurry. I showed her how to alpha lock lines she had already drawn and paint them a color. I’m trying to get her to work smarter, not harder.

While she traced lines. I did this quick animation of a high priest in Callipeg. I worked extra rough and spontaneous as a demonstration. The high priest plunges his hand down and pulls up a virus. I dashed off the animation in an hour. There is no detail, just the motion and timing. I need to change several things and then I will grey it down and start drawing more refined keys. Those drawings will be more precious. I will probably push the starting pose, the anticipation and the final pose of the scene much further. I also plan to change the action on the priest’s right hand.

After this rough stick figure animation I will go back into each drawing and add anatomy and full detail. There is lots of work yet to be done. I will probably extend the animation right down to the legs which are partially hidden as well. The feet can remain as held cells.

COVID Film: Title Shuffle

Posted on by Thor

The working title for my film has always been COVID. I discovered that COVID is the title of a feature film coming out in December of 2023.

I was excited to rename my film COVID APOCALYPSE. Apocalypse tied in with the quote I had placed at the end of the titles. I spent a day redesigning the posters and press material. Then while online that evening I found out a book had the title COVID APOCALYPSE. WT actual F.

Hell, the distressed type on the cover was even similar to my poster design. The book came out 3 months before I started chasing a unique and searchable title for my short film. Unfortunately I had contacted the Chicago International REEL Shorts Film Festival and told them I was renaming the film to COVID APOCALYPSE. As I was scrambling to redesign everything they updated their website.

Yesterday I changed the title to COVID DYSTOPIA. So far I have not found a book or film with that title. But give it a week and I bet one will pop up. Rather than ask the festival to once again change the title, it will screen as COVID APOCALYPSE at that one screening.

A week ago, I  printed 50 post cards with the title of COVID. Those post cards will be real collectors items like the upside down airplane on a postage stamp.

I added COVID DYSTOPIA to the opening scene and the end credits. Lets hope it sticks.